Posted by
Here is an image tutorial that shows you how to install and configure picons on DREAMBOX receivers under DREAMELITE image.
For this tutorial you need.
Winscp for WINDOWS
PICONS 220 × 132 for satellite
– Launch WINSCP in the home window
File protocol: FTP
Hot name: 192.168.1.100 (ip address of your zgemma)
User name: root
Password: “empty” by default the root password in dreamelite is empty (no password needed)
After clicking on Login
Unpack the Picon ASTRA 220 × 132 file
Select the picon folder and drag between the two windows to the /usr/share/enigma2 folder.
press BLUE button and select SETUP
enable show picons in channellist
select the right path
/usr/share/enigma2/picon
after press GREEN button to save.
REBOOT you GUI or your receiver
Congratulation you have Picon now on your DREAMELITE SKIN 
*******************************************************************
You can install the picons on the internal flash memory of your receiver, the internal hard disk, a USB key
Command to add when copying picon to the internal hard drive
ln -s /usr/share/enigma2/picon /hdd/picon
Command to add when copying picon to USB stick
ln -s /usr/share/enigma2/picon/usb/picon